Monday January 30th is the date of the next meeting of the Brown County Livestock/Wildlife Producers Association. It will be held at the Brown County Extension Office located at 605 Fisk Avenue in Brownwood. The meeting will begin at 6:00pm. During the meeting there will be an update from wildlife services concerning predator and nuisance wildlife management efforts in Brown County.
If you own/manage land in Brown County, are involved in livestock production or have an interest in wildlife management you are invited to attend this January 30th meeting. There is no registration fee to attend.
BROWN COUNTY FARM SERVICE AGENCY IMPORTANT DEADLINES
Gaylynn Covey, CED with the Brown County FSA is reminding producers to be aware of the Disaster programs that have been in place for 2022 and that January 30th is the deadline for completion of these applications. Please call the FSA office at 325-643-2573 to make an appointment or to verify the status of your application.
January 30th Deadline for 2022 LFP and ELAP
Producers of Brown County need to be aware of the January 30th deadline to be eligible for 2022 LFP and ELAP benefits. The FSA office has either contacted producers by phone, email or postal letters who still need to sign or provided information to the office. Please DO NOT let this date pass by because you will no longer be eligible for payment if you have not signed the application or turned in eligibility forms or receipts for feed transportation. Contact the FSA if you are not certain if you have completed everything needed.
ELAP Notice of Loss
Brown County FSA is accepting 2023 notices of loss for ELAP which provides emergency assistance for water and feed transportation cost. These must be filed timely. So, if you have had any transportation as of January 1 you must have a Notice of Loss signed by January 31, 2023.
Farm Program Sign Up
March 15, 2023, is the final day to enroll your farm into the 2023 ARC/PLC farm program. Please call the Brown County FSA today at 325-643-2573 for an appointment.
****
NOW IS THE TIME TO PRUNE YOUR YARD TREES
Proper pruning enhances the beauty of almost any landscape tree and shrub, while improper pruning can ruin or greatly reduce its landscape potential.
Reasons for Pruning
- to train the plant
- to maintain plant health
- to improve the quality of flowers, fruit, foliage or stems
- to restrict growth
Plan Approach to Pruning
Pruning should follow a definite plan. Consider the reason or purpose before cutting begins.
By making the pruning cuts in a certain order, the total number of cuts is reduced greatly. The skilled pruner first removes all dead, broken, diseased or problem limbs by cutting them at the point of origin or back to a strong lateral branch or shoot. Often, removing this material opens the canopy sufficiently so that no further pruning is necessary.
The next step in pruning is to make any training cuts needed. By cutting back lateral branches, the tree or shrub is trained to develop a desired shape, to fill in an open area caused by storm or wind damage or to keep it in bounds to fit a given area. To properly train a plant, one should understand its natural growth habit. Always avoid destroying the natural shape or growth habit when pruning unless maintaining a close watch over the plant, for after a period of time it attempts to assume the more natural growth habit.
Make additional corrective pruning to eliminate weak or narrow crotches and remove the less desirable central leader where double leaders occur. After these cuts have been made, stand back and take a look at your work. Are there any other corrective pruning cuts necessary? If the amount of wood removed is considerable, further pruning may need to be delayed a year or so. Remove water sprouts unless needed to fill a hole or to shade a large limb until other branches develop.
When to Prune
Pruning can be done at any time of the year; however, recommended times vary with different plants. Contrary to popular belief, pruning at the wrong time of the year does not kill plants, but continual improper pruning results in damaged or weakened plants. Do not prune at the convenience of the pruner, but rather when it results in the least damage to the plant. There is little chance of damaging the plant if this rule is followed. In general, the best time to prune most plants is during late winter or early spring before growth begins. There are exceptions to this rule.
It also is advisable to limit the amount of pruning done late in summer as new growth may be encouraged on some plants. This growth may not have sufficient time to harden off before cold weather arrives resulting in cold damage or winter kill. Prune plants damaged by storms or vandalism or ones with dead limbs as soon as possible to avoid additional insect and disease problems that may develop.
Wound Dressing
Much has been written about the advantages and disadvantages of using a wound dressing on large cuts. Traditionally, wound dressing or pruning paint is used only on cuts larger than an inch in diameter. On oak trees in areas of Texas where the oak wilt disease is prevalent, wound dressing should be used to help prevent the bark beetle from spreading the disease through the pruned surface on a tree. Apply wound dressing immediately after making cuts. Waiting over 1 day is too long.
Making Pruning Cuts Correctly
To encourage rapid healing of wounds, make all cuts clean and smooth. This requires good, sharp pruning equipment. Do not leave stubs since they are usually where die back occurs. Avoid tearing the bark when removing large branches.
When cutting back to an intersecting (lateral) branch, choose a branch that forms an angle of no more than 45 degrees with the branch to be removed (Figure 5). Also, the branch that you cut back to should have a diameter of at least half that of the branch to be removed. Make slanting cuts when removing limbs that grow upward; this prevents water from collecting in the cut and expedites healing.
Thick, Heavy Branches
Thick and heavy branches should be removed flush to the collar at the base of the branch, not flush with the trunk. The collar is an area of tissue containing a chemically protective zone.
When cutting branches more than 1 1/2 inches in diameter, use a three-part cut. The first step is to saw an undercut from the bottom of the branch about 6 to 12 inches out of the trunk and about one third of the way through the branch. Make a second cut from the top, about 3 inches further from the undercut, until the branch falls away. The resulting stub can then be cut back to the collar of the branch.
Topping Versus Thinning
All too often trees are topped (“dehorned”) to reduce size or to rejuvenate growth. In either case topping is not a recommended practice; in fact, some refer to it as the “Texas chain saw massacre”. Topping is the process whereby a tree is cut back to a few large branches. After 2 to 3 months, regrowth on a topped tree is vigorous, bushy and upright. Topping seriously affects the tree’s structure and appearance. The weakly attached regrowth can break off during severe wind or rainstorms. Topping may also shorten the life of a tree by making it susceptible to attack by insect and disease.
Thinning is a better means of reducing the size of a tree or rejuvenating growth. In contrast to topping, thinning removes unwanted branches by cutting them back to their point of origin. Thinning conforms to the tree’s natural branching habit and results in a more open tree, emphasizing the branches’ internal structure. Thinning also strengthens the tree by forcing diameter growth of the remaining branches.
Training Young Trees
Young trees can be trained using pruning techniques which will help promote plant health and long life.
The central leader of a tree should not be pruned unless the leader is not wanted. Trees with a central leader may need little or no pruning except to eliminate branches competing with the central leader. These competing branches should be shortened. Some pruning may be necessary to maintain desired shape and to shorten extra vigorous shoots.
The height of the lowest branch can range from a few inches above the ground for screening or windbreaks, to more than 7 feet above the ground near a street or patio. Removal of lower limbs is usually done over a period of years beginning in the nursery and continuing for several years after transplanting until the desired height is reached.
The concept in training a tree called “the trashy trunk” refers to this gradual raising of the lowest branches of a tree. Lower branches on the main trunk help create a thicker trunk more quickly. A common mistake in pruning young trees is to strip them of small branches leaving only a tuft of leaves at the top of the tree. Remove lower limbs when they reach 1 inch in diameter.
For greater strength, branches selected for permanent scaffolds must have a wide angle of attachment to the trunk. Branch angles less than 30 degrees from the main trunk result in a very high percentage of breakage, while those between 60 and 70 degrees have a very low breakage rate.
Major scaffold branches of shade trees should be vertically spaced at least 8 inches apart and preferably 20 to 24 inches apart. Closely spaced scaffolds have fewer lateral branches resulting in long, thin branches with poor structural strength.
Pruning Mature Trees
Mature trees are generally pruned only for sanitation, safety or to restrict size. Trees are best pruned during the dormant season. This is especially true for oaks to help prevent the spread of oak wilt.
In storm-damaged trees, remove all broken branches and reshape the tree as well as possible at the particular time.